Grandstream HT801 Internet Phone Adapter

ht801-top

Enables feature-rich telephone service over your Internet connection
One standard telephone jacks for your phone or fax machine with independent phone number
High quality, clear sounding voice service simultaneous with Internet use Compatible with all common telephone features: Caller ID, Call Waiting, Voicemail, etc.

Supports advanced voice quality-of-service (QoS) capabilities, analogue FAX, and UDP, TCP, TLS security protocols.

 

Cost: $65.90 + $15 postage Australia wide

  Pay Now 

 

 

ht801 ports

 

HT801/HT802 Technical Specifications

The following table resumes all the technical specifications including the protocols/standards supported, voice codecs, telephony features, languages and Upgrade/ Provisioning settings for the HT801/HT802.

 


Interfaces

 

HT801

HT802

Telephone Interfaces

One (1) RJ11 FXS port

Two (2) RJ11 FXS ports.

Network Interface

One (1) 10/100Mbps auto-sensing Ethernet port (RJ45).

LED Indicators

POWER, INTERNET, PHONE

POWER,          INTERNET,             PHONE1, PHONE2.

Factory Reset Button

Yes.

Voice, Fax, Modem

 

HT801

HT802

Telephony Features

Caller ID display or block, call waiting, flash, blind or attended transfer, forward, hold, do not disturb, 3-way conference.

Voice Codecs

G.711 with Annex I (PLC) and Annex II (VAD/CNG), G.723.1, G.729A/B, G.726, G722, iLBC, OPUS, dynamic jitter buffer, advanced line echo cancellation.

Fax over IP

T.38 compliant Group 3 Fax Relay up to 14.4kpbs and auto-switch to G.711 for Fax Pass-through.

Short/Long Haul

Ring Load

5 REN: Up to 1km on 24 AWG.

2 REN: Up to 1km on 24 AWG.

Caller ID

Bellcore Type 1 & 2, ETSI, BT, NTT, and DTMF-based CID.

Disconnect Methods

Busy Tone, Polarity Reversal/Wink, Loop Current.

Signaling

 

 

 

HT801

HT802

Network Protocols

TCP/IP/UDP, RTP/RTCP, FTP/FTPS, HTTP/HTTPS, ARP/RARP, ICMP, DNS, DHCP, NTP, TFTP, SSH, Telnet, STUN, SIP (RFC3261), SIP over TCP/TLS, SRTP, TR-069, DDNS.

QoS

Layer 3 (ToS, DiffServ, MPLS).

DTMF Methods

In-audio, RFC2833 and/or SIP INFO.

Provisioning and

Control

HTTP, HTTPS, FTP, FTPS, SSH, Telnet, TFTP, TR-069, secure and automated provisioning using AES encryption, syslog.

Security

 

HT801

HT802

Media

SRTP.

Control

TLS/SIPS/HTTPS/SSH/Telnet.

Management

Syslog support, SSH, Telnet remote management using web browser.

Physical

 

HT801

HT802

Universal Power

Supply

Input: 100-240VAC, 50-60Hz.

Output: 5.0VDC/1.0A.

Environmental

Operational: 32o – 104oF or 0º – 40ºC.

Storage: 14o – 140oF or -10º – 60ºC.

Humidity: 10 – 90% Non-condensing.

Dimensions and

Weight

  • 100mm x 100mm x 29.5mm
  • 102g

          100mm x 100mm x 29.5mm          114g (without package).

Compliance

 

HT801

HT802

Compliance

FCC Part15B EN55032, EN55024, EN61000-3-2,   EN61000-3-3, EN60950-1,         AS/NZS            CISPR22,

AS/NZS60950.1, S003

FCC 15B, AS/NZS CISPR22, AS/NZS60950, EN55022, EN55024,

EN60950, EN61000-3-2, EN61000-33, UL (Power supply).

     Full documentation and configuration manual is available on our configuration page.