Grandstream HT801/HT802 v2 (Version 2) VoIP SIP adapter configuration manual
-
Before configuration, you need to have an active account with us.
-
If you don't have an adapter, you may purchase it here: Buy Grandstream HT-801 phone adapter
-
Wait 60 seconds after plugging your HT80x adapter
-
Pick up the phone connected to the HT80x and dial the * key on your phone 3 times (Press Asterisk Key 3 times). Press "0", and then press "2" to get an IP address of ATA.
-
Open a web browser on your computers such as Firefox or Chrome and enter the IP address you heard in the previous as the address (I.E. where you would normally enter www.yahoo.com).
Please note: some browsers will require you to remove leading zero's ( 0 's ) in the IP address. For example, if you heard "192.168.001.010" you should change this to "192.168.1.10".
You should now see a page that looks like this:
-
Enter the default credentials in the appropriate fields. Please specify "admin" as the username, and the password is a unique individual password printed on the label, on the back of your adapter. Please see the password on the back of your adapter.
- Once the password is entered, please change the default password to your own password:
-
After entering a new password, you should see a screen that looks similar to the one below. Navigate to Port Settings > FXS PORT Configuration:
- Check your device credentials via MY ACCOUNT portal > Personal details > Devices
- Your login/password is
- coming from MY ACCOUNT portal > Personal details > Devices:
Use these settings to input into FXS Port configuration settings:
- Set Primary SIP Server as: sip.australianphone.com.au
- Set SIP User ID: Username from your Device Settings above
- Set SIP Authenticate ID: Username from your Device Settings above
- Set Password: Password from your Device settings above
- Set Name: Username for your Device Settings above
- DNS Mode set: SRV
- Click the "Save" button at the bottom of the page
-
- Navigate to "Codec Settings" page
- Select PCMA1 as choice1, and PCMU as choice 2
- Click the "Save" button at the bottom of the page
- Navigate to the "Call Settings" page
- Insert next Dial Plan: {000|0011x+|1300xxxxxx|13[1-9]xxx|1800xxxxxx|0[2345678]xxxxxxxx|[2-9]xxxxxxx|09xxx}
-
Click the Save and Apply button at the bottom of the page, and your adaptor will be restarted shortly restarted
- Your adaptor is ready to use, you should see three blue lights (Power, Internet and Line 1 registration).
- Make a test call to 09002 free number to check your sound.
